Alexis Rohlin is a professional writer for various websites. Slide the retaining nut onto the pivot rod and attach it to the tailpiece. Then push the assembly back in and replace the cover plate. Tip Virtually all sink drains come in a kit with a slip nut, under-sink washer and lock nut.
How to Connect the Pivot Stopper in a Sink
Warning Confirm that the tailpiece is the same diameter as the P-trap. That is why there is also one on a toilet. Lift the pivot stopper out of the sink drain. On some sinks, you may be able to pull it right out.
When you go to the store to buy a replacement stopper, you want to look for a pop-up assembly. Attach the clevis strap to the stopper lift rod on the sink. You may have to turn the stopper to unhook it from the pivot rod. They will also come in a kit that includes the clevis, nuts, washers and spring clips, who is ezra miller to hook them up to any sink.
From under the sink, hold the drain tailpiece with one hand and tighten the mounting nut upwards toward the bottom of the sink. You have it connected properly when you move the clevis rod up and down and the stopper moves correspondingly in the sink. My sink has some small cracks in it starting at the drain and going outward into the bowl, which have been sealed.
You can buy adapters at stores selling sink drains and pipes. Hold it and turn the body of the pop-up assembly below to unscrew it from the finished flange. The size of those things is standard. The old finished flange will not be needed. In many sinks, hair and crud accumulates around the body of the stopper, clogging the drain.
Screw the pivot rod nut onto the threaded fitting on the side of the tailpiece, so the ball is secured to the tailpiece. Screw the parts together loosely and check the action. The vertical rod is the pivoting rod that moves the pivot stopper in the sink drain. If the pop-up is working properly, you can tighten the nut hand-tight.
This is what you will see when the finished flange is unscrewed from the body of the pop-up assembly. When the drain is closed, the pivot rod should slope slightly uphill from the clevis to the tailpiece. Apply a generous bead of plumber's putty to the underside of the flange on the sink drain fitting.
Line it up with an insertion hole on the sink stopper. How to Connect the Pivot Stopper in a Sink. This nut will secure the washer beneath the sink and make a waterproof fitting. The original nut will screw on, but there is a crack on the end, so I can't use it.
How to Install a Pop-Up Drain Stopper in a Bathroom Sink
While pipe joint compound is not strictly necessary, without it, you might have trouble getting the rubber to seal. Go to your local plumbing store to look and ask questions. Install the plastic washer then the rubber washer and push it all the way down on top of the mounting nut, local hook up as shown here. Slide a drain washer over the tailpiece. Tighten the lock nut firmly so that the plumber's putty oozes out from beneath the drain flange.
This plastic one is made to tighten sufficiently with fingers only and no pliers. Something will always be as it should not be. Drop the new drain plug into the hole in the finished flange from the top of the sink. Older tubs may have corroded flanges. Tighten the nut on the pop-up assembly body.
- Does the stopper in the sink pull down as far as it can go to seal?
- Check for leaks under the sink.
- Yu can try to replace only that rod.
If the pivot stopper does not move smoothly you will need to tighten the retaining nut that holds the pivot stopper bar up in the back of the sink drain tailpipe. Tighten the mounting nut with channel-type pliers while continuing to hold the tailpiece in place. See the text boxes for where to put sealant.
Usually it is the metal rod that is the arm which rusts off and needs replacing. The putty needs to cover the circumference of the drain flange without any breaks. Press the putty beneath the drain flange, keeping the integrity of the rope shape.
How to Fix a Bathtub or Sink Pop-up Stopper
Once it does, you will have difficulty making the nut hold the ball on the linkage rod so there are no leaks. It will be a flattened piece of rubber that fits up under the sink. The lever that you pull up to have the stopper close came off in my hand.
Fix a Sink Stopper
Keeping the drain clear of hair, soap and shampoo residue, and other debris is one of the best ways to help keep the stopper in good working order. Or, the clevis may be out of adjustment see illustration to identify the various parts. Once the stopper is in position, insert the pivot rod into the opening in the side of the tailpiece from under the sink. Yalanovsky also writes a bimonthly column that provides home improvement advice.
Usually, there is a plastic washer on each side of the plastic ball. Fortunately, there is a plastic ring molded into the bottom of the sink. Test the pivot stopper by raising and lowering the stopper pull knob. Apply Pipe-Joint Compound.
Add more sealant if needed. Screw the body onto the finished flange without disturbinng the finished flange and its seal. You should be able to see a vertical rod move in the drain when you move the knob up and down.
Hello Phil, I have just installed three new sink faucets in our bathrooms. Bathroom sink pop-ups are raised and lowered with a lift knob or lever, usually located on or near the faucet body. The bathroom sink drain connects to the drainpipe beneath the sink.
- Insert the pivot stopper down into the drain and move the stopper pull knob until the rod moves and slides into the hole located on the bottom of the pivot stopper.
- It looks the same as the original one, but it just won't screw on.
- The body and the flange may be just fine.
- But, I really don't want to let it beat me like that though.
- Next, slide the clevis strap onto the end of the pivot rod.
- Some Internet businesses have a contact number or e-mail address where you can make inquiries before buying.
You may have to twist the stopper to unhook it from the pivot rod. The old sealant cracks and breaks away easily. You have saved my sanity this morning!
Once the pop-up assembly nut is loose a few turns, rock the pop-up assembly back and forth to loosen the old sealant below the finished flange at the bottom of the sink. Use locking-jaw pliers to loosen it if necessary. Make sure the opening in the tailpiece where the pop-up pivot lever will fit is pointing straight back towards the wall. Use an adapter to fit sink drains with mismatched tailpieces and drainpipes.